Installation of water supply in a private house, as a rule, begins with the arrangement of a source, if there are no centralized networks nearby. Next, you need to lay pipes, connect the discharge equipment and install filters. Design work is best left to professionals.

The difference between the accumulator and the expansion tank in the destination. The first is used to accumulate a supply of water, maintain optimal pressure and adjust pump on / off cycles. The expansion tank collects excess water in the heating system.

To increase the water pressure in the water supply system of a private house, you can install a booster installation. It should be borne in mind that too much pressure can damage the pipe connections.

The optimal water pressure in the water supply system of a private house is determined by the type and flow rate of the source, the capacity of the pumping equipment, the volume, location and configuration of the storage tank, the number and location of water points. Norms for cold water vary from 0.3 to 6 bar, for hot - from 0.3 to 4.5.

Replacement accessories for the accumulator: diaphragm, nipple, flange, spool, hose, non-return valve, control monitoring devices. When buying, you should give preference to original spare parts.

The water supply system in a country house is usually independent of centralized networks. A well or a well is being equipped, an external and internal pipeline is being carried out, pumping equipment, filters and storage tank are connected.

Replacing the membrane in the accumulator is necessary if its integrity is violated. It is important when choosing a pear to take into account the technical parameters of the equipment, to choose the right neck diameter and material. It is recommended to contact the manufacturer from whom the tank itself was purchased.

Small-sized drilling rigs for drilling water wells are able to go deep into the ground up to 100 meters. For sources of smaller depth, you can use small rotor, screw, impact structures. Powerful volumetric equipment is necessary for drilling artesian wells over 100 m.

Self-washing water filters do not require regular inspection, replacement of cartridges and their cleaning. If the filter element becomes dirty, the water pressure drops and the rinsing process starts.

To bring water from the well into the house at the cottage with your own hands, you need to lay a pipeline and install pumping equipment. First you need to make a plan with all the turns, water points, indicating the distance and depth.

The water level in the well can vary up or down depending on weather, season, movement of aquifers. Also, the flow rate decreases if another well is made in the same water reservoir. It is important to ensure that the source does not mix with the tip.