It is important to perform water analysis for chemical and bacteriological indicators regularly, and not once after the construction of a well. The state of health of all family members depends on this. When drinking low-quality water, the body does not receive the necessary trace elements and is susceptible to infection or intoxication.

Creating a water supply system from a well in a country house or plot is a task that requires attention, but is not particularly difficult. You can make a system for supplying water to the house yourself. However, one will have to hire a specialist to analyze the water and, possibly, a technique to dig a trench.

To choose a pump for a well, you need to calculate the required amount of water consumption, the height of the liquid, the depth of the source. It is also worth paying attention to the warranty period and the presence in the city of a network of manufacturer service centers.

Tools for threading water pipes: die, screw die, tap. They must be of high quality, sharp. In the process, you need to use grease and regularly remove chips, so that there are no cutting defects.

The average pressure in the accumulator is 1.5 bar. Depending on the volume of the tank, it can be reduced or increased. It should be remembered that an excessive decrease in the indicator leads to membrane wear, and an increase leads to an additional load on the pipes and main components.

The pressure in the expansion tank, depending on the model, must be from 1 to 3 bar. Indicators also depend on the location of the unit relative to the entire system. If pressure drops, make sure that the diaphragm and housing are tight, and then pump air into the pump.

Maintenance and repair of the accumulator in the water supply system includes regular checks for leaks and pressure levels, replacement of worn parts, and flushing the membrane, if necessary. In case of breakdowns of complex work units, it is recommended to contact a service center.

Technical conditions for connection to water supply networks - a document that is part of the project package. Issued by a water supply organization at the request of consumers. It indicates the main technical parameters and conditions that are necessary to connect to centralized communications.

The axonometric diagram of the water supply serves as the basis for the hydraulic calculation of the system. It determines sections of the highway with a constant flow of water. Nodal points are the sections of branch pipelines from risers. Tables (specifications) for materials and equipment are compiled for the scheme.

The well pump control unit is designed to adjust the pressure in the system, control the water level in the source, protect equipment from idling and overheating. There are three generations of automation. Choose them depending on the required functions and the budget of the consumer.

The downhole adapter and caisson are designed to protect the water supply from freezing and pollution.The caisson is a more functional design that allows water to be discharged to several buildings, without any problems inspect and maintain pumping equipment.