Connecting a water station to a well involves assembling equipment, connecting to a water supply system, setting up automation and checking the system’s performance. To protect the tip, a caisson should be built, in which it is also possible to place a hydraulic accumulator, a control unit, a pumping unit.

Filters for cleaning water from a well must be selected depending on the type and design of the source, the physical, biological and chemical composition of the liquid. It is recommended to do an analysis in the laboratory to determine the type of treatment device.

Water towers are found everywhere: in suburban villages, villages, on farms, in greenhouses, in the territories of small enterprises. What are these structures, why are they needed and how do they work? What...

Installing a pump in a well is a time-consuming procedure that requires care during calculations. You should correctly choose the diameter of the model, power, performance. It is important to use a strong cable for hanging equipment.

Auger drilling is one of the easiest and fastest ways to form a source. Depending on the type of soil and depth, manual or mechanized installations are used. If necessary, a hand tool can be made with your own hands.

Casing pipes for wells are made of plastic, asbestos cement or metal. The choice of material depends on the depth of the source and the type of soil. It is important to consider that metal corrodes over time, asbestos cement cannot provide absolute tightness, and plastic does not have high strength.

A well in the country provides water supply in the absence of a central water main. To equip it, you need to correctly select a place for drilling, connect pumping equipment that is suitable for power, lay a pipeline, build a caisson.

To soften hard water from the well, various filters are used: ion-exchange, magnetic, electromagnetic, reverse osmosis. Before buying equipment, it is recommended that you conduct a laboratory analysis of the fluid to select the most effective softener.

If the water from the well smells like a swamp, you need to check the source for clogging and tightness of the casing. To clean the well, it is necessary to pump it with a drainage pump, replace the bottom filter. Also, physical, chemical, sorption and complex cleaning methods are used to eliminate odor.

To provide a private house with autonomous water supply, it is necessary to make a well on the site. There are Abyssinian, sandy and artesian springs. The first one delivers liquid from the overhead water, the second from the sandy aquifers, the third from the limestone water resistant layers.

Do-it-yourself installation of a pumping station in the well does not constitute problems if you act sequentially and take into account all the nuances of installation. You should carefully study the instructions before performing work. It is recommended to take care of the equipment location in advance, as it is very noisy during operation.