Connecting the deep pump to the water supply system will ensure uninterrupted flow of water with optimal pressure. Devices are divided into vibration, centrifugal and screw. The choice depends on the source of water supply, the distance to the building, the required volume of water.

There are several types of country water supply. The choice depends on how much time it is planned to spend in the house, and also what equipment will be used - washing machines, showers, toilet, bathroom. The method of water supply depends on the terrain, as well as on the financial capabilities of the residents.

A water pipe is punctured if necessary to hold a pipe under a building or road. Also, the method is used to preserve the landscape on the site. Types of punctures: punching, drilling, hydro- and vibro-puncture. They differ in technology and equipment used.

The connection of metal-plastic water pipes is carried out using crimp and press fittings. For polypropylene use high temperature welding. Polyethylene pipes are connected by compression fittings, and chlorinated PVC by gluing.

Water supply in the country can be carried out from the central aquifer, borehole or well. In the latter case, water can only be used for irrigation and domestic needs. As a rule, it is not suitable for drinking. When drafting the project, the duration of the operation of the water supply system during the year and climatic conditions should be taken into account.

If it is necessary to crash into the water pipe of the central network, the specifics of the pipeline material should be taken into account. Before starting work, you need to get a permit issued in the prescribed manner.

Plastic pipes for the water supply in the country are used for all-weather supply of water to the house. If necessary, lay a watering line; instead of rubber hoses, polyethylene pipes and fittings can be used.

Solder the polypropylene pipe if water drips, using an industrial hair dryer or a hot nail. This is a temporary measure - subsequently, the damaged area must be cut and replaced. Complete soldering is carried out in three ways: sleeve, socket and butt.

Filters for rough and fine water purification for a country house should be selected taking into account the amount of consumption, its chemical composition and the volume of unnecessary impurities. By the method of installation, the devices can be jugs, “under the sink” and in the form of nozzles on the tap.

Unauthorized connection to the water supply system will sooner or later lead to financial losses, many times higher than the cost of legal provision of water supply. Minimum costs: penalty for tapping into the central water supply and paying the cost of the maximum possible water consumption.

The water supply for giving from plastic pipes will last 40-50 years, if properly laid. It is necessary to calculate the depth, make a wiring diagram, choose a heater. Installation works do not require special skills, so they can be carried out independently.